Debug Commands

This section describes the debug commands.

Syntax

# debug

This command includes the following commands:

Command	Description
adsl-connection	See debug adsl-connection
adsl-firmware	See debug adsl-firmware
auxilary-files	See debug auxilary-files
bfd	See debug bfd
bgp	See debug bgp
capture	See debug capture
cellular	See debug cellular
cli	See debug cli delayed-command
cwmp	See debug cwmp send-connection-request
data-syslog	See debug data-syslog
debug-recording	See debug debug-recording
dhcpv6_client	See debug dhcpv6_client
dhcpv6_server	See debug dhcpv6_server
dial-plan	See debug dial plan
dsl	See debug dsl
dot11radio	See debug dot11radio
dynamic-routing	See debug dynamic-routing
ethernet	See debug ethernet
exception-info	See debug exception-info
exception-syslog-history	See debug exception-syslog-history
fax	See debug fax
get-global-ip	See debug get-global-ip
ipv6-ra	See debug ipv6-ra
log	See debug log
ospf	See debug ospf
ospf6	See debug ospf6
persistent-log show	See debug persistent-log show
phy-err-injection	See debug phy-err-injection
pstn	See pstn-debug
reset-history	See debug reset-history
reset-syslog-history	See debug reset-syslog-history
rip	See debug rip
ripng	See debug ripng
rmx-serial	See debug rmx-serial
serial-port	See debug serial-port
sip	See debug sip
speedtest	See debug speedtest
syslog	See debug syslog
syslog-server	See debug syslog-server
test-call	See debug test-call
usb	See debug usb
voip	See debug voip
vrf	See debug vrf
zebra	See debug zebra